Results 11 to 20 of 20
Thread: Hybrids................
-
04-06-2009 #11
Well I own a CRX and I would LOVE to have the B18 series engine that came in the old Integra GSR installed in it. With a potential for well over 200hp out of that engine, mounted in a car that weights less than 2500lbs the biggest problem would be keeping the tires connected to the pavement.
As a matter of fact it was a 2cd Gen CRX like mine with just that engine that was the first front wheel drive car to break the 9 second quarter mile. The solution used to get the power to the pavement with that car was to place wheelie bars at the back of it to keep it from squatting so much on takeoff.
I'd love to have a car like that to go Camero and Mustang hunting. It would be great to watch the look on some assholes face when "that bitch in that little mouse car" blew his doors off.
Ashlee
Gender is defined between your ears, not between your legs!
-
04-06-2009 #12
- Join Date
- Dec 2004
- Posts
- 148
Re: Hybrids................
Originally Posted by JohnnyWalkerBlackLabel
-
04-07-2009 #13
LS1 swap with a tranny into an E36: $12k
M5 swap with a tranny into an E36:$25k
nuff said
snɯıʇdo snʇoʇ soʌ oloʌ
-
04-07-2009 #14Originally Posted by msbhaven
Potential is numerous. but the block is bullshit.Id much rather take a type R block which I wont ever get or a LS block. VTEC head of course.....
GSR is a POS FYI LSVTEC shits on gsr and that weakass crankshaft. I only say from personal experience with these engines....Watchout JW will call u a ricer Him and his crout fcker ass -_- Had to bud....germans-crouts ricers-FAST AND FURIOUS 0_0
Living your dream! Just call me your superhero! JIX
1/3 of the Legendary Trifecta called O ED & the Jizzzyyy...
PeekyMcWatchmeFUCK!
OEJTM-#DEGENERATES
HBSF-FETC
-
04-07-2009 #15
- Join Date
- Dec 2004
- Posts
- 148
Originally Posted by JohnnyWalkerBlackLabel
-
04-07-2009 #16
lol a GSR engine might make 200hp to the flywheel in space
not on planet Earth
snɯıʇdo snʇoʇ soʌ oloʌ
-
04-07-2009 #17
- Join Date
- Mar 2007
- Posts
- 315
I would like to put a 7.3 l powerstroke or a 5.9 l Cummins into a 78 F-250 4 wheel drive. I think that would be a sharp truck.
-
04-07-2009 #18Originally Posted by JohnnyWalkerBlackLabel
JW Always hating on honda's mofo these motors are amazing I was running 1 cylinder halfway down a track and ran 12 lows. Which aweshocked me 0_0
Another time my AF ratio was so fucked up 20:4:1 Odd ehh ran fine though. So I was like wtf.
Living your dream! Just call me your superhero! JIX
1/3 of the Legendary Trifecta called O ED & the Jizzzyyy...
PeekyMcWatchmeFUCK!
OEJTM-#DEGENERATES
HBSF-FETC
-
04-07-2009 #19
Damn it, that's what I get for not proofreading my post. I meant I wanted the engine out of the type R not the GSR. I put the wrong designation in to the first post.
JW yes a B18 out of GSR OR an R can be modified to make over 200hp at the flywheel. The 2 liter engine in the S2000 is nothing more then a bored and stroked B18 set up to run RWD instead of FWD. And that engine makes over 200 stock. Then we could add a supercharger or turbocharger, modify the cams, free up the exhaust, add cold air intake, beef up the fuel injection and ignition....well you get the idea. By the time you've done everything you can the engine would make closer to 300hp then 200.
The beauty of the set up I want is that it could all be had for less than 20 grand AND nobody would expect the car to have that kind of speed.
Ashlee
Gender is defined between your ears, not between your legs!
-
04-07-2009 #20Originally Posted by msbhaven
But firstly JW had a American Type R for what a month so he get the claps for a few seconds....
B18c5-Type R high compression
plus side-Great trans,block and head
Neg side-Only good for Naturally aspired.CANNOT take forced induction without sleeving block and dropping LOW compression pistons in. Which I wouldnt do to DE-value the motor.
ecu(computer) good 300 dollars. needless to say if in a ef chassis model meaning 88-91 civic or crx you need to convert to obd1 or obd2 and get hydraulic conversion kit for the transmission.
f20b is s2k motor we have established that.although it is 180 degrees different on displacement also different series hun...
B series only can go with B SERIES parts F20b is a knockoff of H series in a way since the f22/f23 that went in accords well the parts are the same as h22 or h23. the vtec model with vtec Non with non....
Modifying honda's is not as easy as one thinks. if you dont know what your doing on firsthand basis I suggest dont do anything to your vehicle.
computers on vehicles cost $$$$
Ms Behaven I am a mechanic Ive been messing with hondas since about 15.Im 21 now,Not alot of years there but I know what im doing plus I got Mitchell on Demand5 to help me if I dont have specs for anything
Living your dream! Just call me your superhero! JIX
1/3 of the Legendary Trifecta called O ED & the Jizzzyyy...
PeekyMcWatchmeFUCK!
OEJTM-#DEGENERATES
HBSF-FETC